|Khu vực miền Nam|
Ms.Liên ( Hồ Chí Minh )
Mr.Dũng ( Bình Dương )
Mr.Nam (Vũng Tàu-Long An)
|Khu vực miền Bắc|
Mr.Bằng ( Hà Nội )
Mr.Cường ( Hải Phòng )
A hexagonal socket is provided on both stud ends, and a grease nipple for greasing is fi tted to the inside. Therefore, lubrication and mounting from both directions is possible.
Since the mounting shaft of the stud and the stud head have the eccentricity of between 0.4 mm to 1.0 mm, the position of this Eccentric Cam Follower can easily be fine adjusted by turning the stud, achieving a compact, highly accurate integrated structure. A hexagon socket is provided on both ends of the stud, and a grease nipple is placed inside the stud from the each end.
This model is a low-price Cam Follow having a driver groove or hexagon socket in the stud head. The all-stainless steel type (symbol M) is optimal for clean room applications since it does not develop rust from external atmosphere and generates little dust.
Basically the same as the popular type Cam Follower, this model is provided with tapped holes for piping on the stud head and the thread. It is optimal for locations where an integrated piping system for greasing is required.
This model can be installed in the same mounting hole as that of the popular type Cam Follower. Since the mounting shaft of the stud and the stud head are eccentric by 0.25 mm to 1.0 mm, the position of this model can easily be adjusted simply by turning the stud. Thus, it is a compact, highly accurate eccentric cam follower with an integral structure.
Based on the popular type Cam Follower, this model is incorporated with thrust load balls. It is capable of receiving an axial load generated by a mounting error.
The outside diameter of its outer ring is very small relative to the stud diameter, so this cam follower can accommodate highly compact designs.
To simplify installation, a flat-head slot has been machined into the stud so that it can be secured with a screw.This is ideal for units where there is no space to fasten the stud.
This model, which employs a double row of cylindrical rollers, can accommodate high radial loads. A hexagonal socket is provided on both stud ends, and a grease nipple for greasing is fi tted to the inside. Therefore, lubrication and mounting from both directions is possible. Stud diameter: 16–30 mm