|Khu vực miền Nam|
Ms.Liên ( Hồ Chí Minh )
Mr.Dũng ( Bình Dương )
Mr.Nam (Vũng Tàu-Long An)
|Khu vực miền Bắc|
Mr.Bằng ( Hà Nội )
Mr.Cường ( Hải Phòng )
A global standard size LM Guide in which each row of balls is placed at a contact angle of 45° so that the rated loads applied to the LM block are uniform in the four directions (radial, reverse radial and lateral directions), enabling the LM Guide to be used in all orientations.
Since it is a compactly designed model that has a low sectional height and a ball contact structure capable of receiving a large load in the radial direction, this LM Guide is optimal for horizontal guide units.
This model is an ultra-heavy type of LM Guide that achieves a deep grooved raceway with its diameter more approximate to the ball diameter than the conventional type and has high rigidity, vibration and shock resistance, and damping characteristics, which are required for machine tools. As a result, it is optimal for receiving a radial load in particular.
This model is an ultra-heavy type of LM Guide that achieves a deep grooved raceway with its diameter more approximate to the ball diameter than the conventional type and has high rigidity, vibration and shock resistance, and damping characteristics, which are required for machine tools.
Due to a low center-of-gravity structure with a large rail width and a low overall height, this LM Guide model can be used in places where space saving is required or high rigidity against a moment is required even with a single rail.
The SRS-G, a model equipped with uncaged, full-complement bearings, is also available. Due to its cageless design, however, the SRS-G’s dynamic load rating is lower than that of standard SRS models.
These models are Miniature LM Guides capable of receiving loads in all directions, and adequately operating under a small moment load despite being single-rail guides.
An LM Guide that is capable of receiving the identical load in the 4 directions with parallel installation of 2 rails, has a low sectional height and allows the clearance to be adjusted.
Since this LM Guide model has a large self-adjustment capability, it is optimal for locations where it is difficult to secure mounting accuracy and for general industrial machines and the likes.
Since its LM rail has a sectional shape with high flexural rigidity, this LM Guide can be used as a structural member.
This model is an integral type of LM Guide that squares an internal structure similar to model HSR, which has a proven track record and is highly reliable, with another and uses two LM rails in combination.
An integral type of Miniature LM Guide that allows an orthogonal LM system with an extremely low height to be established.
This model is a new straight-curved guide that allows the same type of LM blocks to continuously move on straight and curved rails by combining the technologies of the LM Guide HSR and the R Guide HCR.
An LM Guide capable of performing larger circular motion than rotary bearings.
A highly corrosion resistant LM Guide that achieves a maximum service temperature of 150℃.
This model is an LM Guide that demonstrates superb corrosion resistance by using highly corrosion resistant stainless steel for the LM rail and the LM block and stainless steel for other metallic parts.
Operable in various environments at pressure between atmospheric pressure and vacuum. Capable of withstanding baking temperature up to 200°C.
All components are composed of parts for special environments such as stainless steel. In addition, special solvent is used to de-grease this model.
Since this LM Guide is highly capable of self adjustment and self alignment, it can be used even with rough installation.