Basically the same as the popular type Cam Follower, this model is provided with tapped holes for piping on the stud head and the thread. 
It is optimal for locations where an integrated piping system for greasing is required.

Model No. Main dimensions Basic load rating Detail specifications CAD Dimensional drawing Outer  diameter D Threaded G Outer ring  width C B Overall length B1 With cage Full-roller type 2D  (DXF) 3D Dynamic rating C Static rating C0 Dynamic rating C Static rating C0 mm mm mm mm mm kN kN kN kN CFT 6 16 M6×1 11 12 28 3.59 3.58 6.94 8.5 CFT 8 19 M8×1.25 11 12 32 4.17 4.65 8.13 11.2 CFT 10 22 M10×1.25 12 13 36 5.33 6.78 9.42 14.3 CFT 10-1 26 M10×1.25 12 13 36 5.33 6.78 9.42 14.3 CFT 12 30 M12×1.5 14 15 40 7.87 9.79 13.4 19.8 CFT 12-1 32 M12×1.5 14 15 40 7.87 9.79 13.4 19.8 CFT 16 35 M16×1.5 18 19.5 52 12 18.3 20.6 37.6 CFT 18 40 M18×1.5 20 21.5 58 14.7 25.2 25.2 51.3 CFT 20 52 M20×1.5 24 25.5 66 20.7 34.8 33.2 64.8 CFT 20-1 47 M20×1.5 24 25.5 66 20.7 34.8 33.2 64.8 CFT 24 62 M24×1.5 29 30.5 80 30.6 53.2 46.7 92.9 CFT 24-1 72 M24×1.5 29 30.5 80 30.6 53.2 46.7 92.9 CFT 30 80 M30×1.5 35 37 100 45.4 87.6 67.6 145 CFT 30-1 85 M30×1.5 35 37 100 45.4 87.6 67.6 145 CFT 30-2 90 M30×1.5 35 37 100 45.4 87.6 67.6 145